Screenshots; Resetting Your System - Raymarine a67 Wi-Fi Installation And Operation Instructions Manual

7.5 Screenshots

You can take a screenshot of what is currently displayed on the
screen.
Screenshots are saved to an SD card in .bmp (bitmap) format.
The saved image can be viewed from the multifunction display
or any device capable of viewing bitmap images.
Taking a screenshot
You can take a screenshot by following the steps below.
1. Insert an SD card with suitable free space available into the
SD card slot of your multifunction display.
Note: The SD card slot should be inserted into the card
slot selected in the Customize > Display Preferences
> Screenshot File menu option accessible form the
homescreen.
2. Press the Power button.
The Shortcuts page is displayed:
3. Select the Camera icon.
A confirmation pop-up is displayed.
4. Select Ok.
The screenshot is now saved to the SD card.
Selecting the SD card slot for screenshots
New c Series and New e Series multifunction displays have 2
SD card slots. When performing a screenshot you must first
select which card slot to save the screenshot too.
From the homescreen.
1. Select Customize.
2. Select Display Preferences.
3. Select Screenshot File:.
4. Select either MicroSD 1 or MicroSD 2.
Viewing a screenshot on the multifunction
display
You can view images on the multifunction display
1. Insert an SD card with the screenshot or image saved to it,
into the SD card slot of your multifunction display.
2. From the homescreen, select My Data.
3. Select View Images.
The file browser dialog is displayed.
4. Browse to the location on the SD card to where the image
is saved.
5. Select the image you want to view.
The image will now open.
6. Select Back or Close to close the image.
96

7.6 Resetting your system

Your system may be reset to its factory default settings if
required.
There are 2 types of reset operation, both of which affect the
current display you are using, AND any networked displays.
• Settings reset.
• Settings and data reset.
Settings reset
This option resets your setup menus, page sets, and databar
settings to factory default. It will NOT affect your waypoints,
routes, or tracks data.
Settings and data reset
In addition to the settings reset detailed above, performing a
settings and data reset will also remove ALL waypoints, routes,
and tracks data.
Resetting system settings
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings Reset.
A message is displayed prompting you to confirm the action.
4. Select Yes to proceed with the settings reset, or No to cancel.
Resetting system settings and data
Note: Performing a settings and data reset erases ALL
waypoints, routes, and track data from your system. BEFORE
proceeding with a settings and data reset, ensure that you
backup any data that you want to keep on to a memory card.
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings and Data Reset.
A message is displayed prompting you to confirm the action.
4. Select Yes to proceed with the settings and data reset, or
No to cancel.
New a Series / New c Series / New e Series