Raymarine a67 Wi-Fi Installation And Operation Instructions Manual page 137

• Time— The track points are placed at regular intervals of
time.
• Distance— The track points are placed at regular intervals
of distance.
5. Select the Track Interval and set to the appropriate value:
• Units of time from the list displayed (available if "record
track by" is set to time).
• Units of distance from the list displayed (available if "record
track by" is set to distance).
• Not available — no Track Interval is available if the "record
track by" is set to auto).
Track context menu
Selecting a track in the chart application displays a context menu
showing the track length, number of points and menu items.
The context menu provides the following menu items:
• Stop Goto (only available during active navigation.)
• Erase Track
• Hide Track
• Create Route From
• Rename
• Edit Color
• Acquire Target (only available if Radar overlay is switched
on.)
When creating a track the context menu options change to:
• Stop Goto (only available during active navigation.)
• Stop Track
• Erase Route — Disabled
• Create Route From
• Rename
• Edit Color
• Acquire Target (only available if Radar overlay is switched
on.)
Accessing the context menu
You can access the context menu by following the steps below.
1. New e Series or New c Series:
i. Selecting a location, object or target on-screen and
pressing the Ok button.
2. Touchscreen multifunction displays:
i. Selecting an object or target on-screen.
ii. Selecting and holding on a location on-screen.
Reviewing and editing a track
You can review and edit aspects of the tracks stored.
You can:
Waypoints, Routes and Tracks
• Erase a track.
• Create a route from a track.
• Show or hide a track on the chart (only available from the
chart application).
• Change the name of a track.
• Change the color of a track.
Selecting a track to review or edit
1. Do one of the following to select the required track:
• From the chart application, select a track on screen to
display the track context menu.
• From the chart application, go to the following menu: Menu
> My Data > Track List, and select the required track.
• From the homescreen, select: My Data > Track List and
select the required track.
You can then proceed and review or edit the required track using
the options available.
Erasing tracks
Erasing a track
From the chart application:
1. Select Menu.
2. Select My Data.
3. Select Track List.
The track list is displayed.
4. Select the track you want to erase.
5. Select Erase Track.
The erase track pop up message is displayed.
6. Select Yes to confirm, or No to cancel the action.
Note: You can also erase tracks from the homescreen: My
Data > Track List.
Erasing all tracks
From the homescreen:
1. Select My Data.
2. Select Erase Data From System.
3. Select Erase Tracks From System.
The erase tracks from system dialog is displayed.
4. Select Erase All.
The confirm delete pop up message is displayed.
5. Select Yes to confirm, or No to cancel the action.
137