Raymarine a67 Wi-Fi Installation And Operation Instructions Manual page 167

Course-Up
1
Item
1
2
If you select a new course, the picture will reset to display the
new course upwards.
The reference used for Course-Up depends upon the information
available at a given time. The system always prioritizes this
information in the following order:
1. Bearing from origin to destination, that is, intended course.
2. Locked heading from an Autopilot.
3. Bearing to waypoint.
4. Instantaneous heading (when course-up is selected).
Note: If heading data becomes unavailable whilst in this
mode, a warning message will be shown, the status bar
indicates the Course Up in brackets and the radar uses 0°
heading in relative motion. When heading data becomes
available once more, Course-Up mode is reinstated.
Selecting the radar orientation mode
From the radar application:
1. Select Menu.
2. Select Presentation.
3. Select Orientation & Motion Mode.
4. Select Orientation.
5. Select the required orientation.
Radar motion modes overview
The motion mode controls the relationship between the radar
and your vessel. There are two modes:
• Relative motion.
• True motion.
The selected motion mode is displayed in the status bar. The
default setting is Relative Motion with zero offset.
Relative Motion (RM) with optional Vessel Offset
When the motion mode is set to Relative, the position of your
vessel is fixed on the screen and all the targets move relative
to the vessel. You can specify whether the vessel is fixed in the
center of the window (0 offset) or offset by 1/3 or 2/3 to increase
the view ahead, as shown below:
Examples:
D12211-1
0 offset 1/3 offset
Radar application
2
D12210-1
Description
Current course upwards.
As your vessel's heading changes:
• Radar picture is fixed
• SHM rotates accordingly
D12212-1
2/3 offset
The default motion mode is "Relative", with zero offset.
True Motion (TM)
When the motion mode is set to True, fixed radar targets
maintain a constant position and moving vessels (including your
vessel) travel in true perspective to each other and to fixed
landmasses on the screen. As the vessel's position approaches
the edge of the screen, the radar picture is automatically reset to
reveal the area ahead.
Note: If heading and position data become unavailable when
True motion is selected, a warning message will be shown,
the mode will revert to relative motion and be noted in the
status bar in brackets, for example, (TM).
Note: It is not possible to select True Motion when the
orientation is set to Head Up.
Selecting the radar motion mode
From the radar application:
1. Select Menu.
2. Select Presentation.
3. Select Orientation & Motion Mode.
4. Select Motion Mode.
Selecting Motion Mode will switch between True and Relative.
Changing the radar vessel offset
Radar offset is only available in Relative motion mode.
From the radar application:
1. Select Menu.
2. Select Presentation.
3. Select Orientation & Motion Mode.
4. Select Vessel Offset.
5. Select the required offset value.
D12213-1
167