E7 / E7D Controls; C95 / C97 / C125 / C127 / E95 / E97 / E125 / E127 / E165 Controls - Raymarine a67 Wi-Fi Installation And Operation Instructions Manual

6.3 e7 / e7D Controls

1. Touchscreen — you can touch the screen to operate
many common functions, including all menu operations
(HybridTouch multifunction displays only).
2. Menu — accesses menus. Press again to close menus.
3. UniControl — provides a joystick and rotary control and an
OK button for using menus and applications.
4. Back — press to return to a previous menu or dialog level.
5. WPT / MOB — press and release to access the waypoint
options. Press again to place a waypoint. Press and hold
to place a Man Overboard (MOB) marker at your current
position.
6. Power — press once to switch the unit ON. Once powered
on, press the Power button again to adjust the brightness,
access the power controls for external devices, and access
the autopilot controls. Press and hold to switch the unit OFF.
7. Chart card slots — open the card door to insert or remove
MicroSD cards. There are 2 card slots (labelled 1 and 2),
used for electronic charts and archiving waypoint, route and
track data.
Getting started
6.4 c95 / c97 / c125 / c127 / e95 / e97 /
e125 / e127 / e165 Controls
1
1
D12179-1
1. Touchscreen — you can touch the screen to operate
many common functions, including all menu operations
(HybridTouch multifunction displays only).
2. Home — Press to return to the homescreen.
3. Menu — accesses menus. Press again to close menus.
4. UniControl — provides a joystick and rotary control and an
OK button for using menus and applications.
5. Back — press to return to a previous menu or dialog level.
6. Range In/Out — Press minus (-) to range out and plus (+)
to range in
7. WPT / MOB — press and release to access the waypoint
options. Press again to place a waypoint. Press and hold
to place a Man Overboard (MOB) marker at your current
position.
8. Power — press once to switch the unit ON. Once powered
on, press the Power button again to adjust the brightness,
access the power controls for external devices, and access
the autopilot controls. Press and hold to switch the unit OFF.
9. Chart card slots — open the card door to insert or remove
MicroSD cards. There are 2 card slots (labelled 1 and 2),
used for electronic charts and archiving waypoint, route and
track data.
10. Standby (Auto) — Press to disengage integrated autopilot,
press and hold to activate Auto mode on integrated autopilot.
11. Switch Active Pane — Press to switch the active pane.
UniControl
New c Series and New e Series display include a UniControl
which consists of Rotary, Joystick and push button controls.
2 3
4
5
6
7
8
11 10 9
D12276-1
73