Raymarine a67 Wi-Fi Installation And Operation Instructions Manual page 163

1
4
2 2
3
Item Description
1 Main lobe
2 Side lobes
3 Antenna
4 Arc
5 True echo
6
Side echoes
Indirect Echoes
There are several types of indirect echoes or ghost images.
These sometimes have the appearance of true echoes, but in
general they are intermittent and poorly defined.
2
1
3
Item Description
1 False echo
2 True echo
3 Passing ship
4 Mast or funnel
5 True echo
6 False echo
Multiple Echoes
Multiple echoes are not very common but can occur if there is
a large target with a wide vertical surface at a comparatively
short range. The transmitted signal will be reflected back and
forth between the target and your own ship, resulting in multiple
echoes, displayed beyond the range of the true target echo,
but on the same bearing.
Item Description
1 True echo
2 Multiple echoes
Radar application
6
5
6
4
1
Blind Sectors
Obstructions such as funnels and masts near the radar antenna
may obstruct the radar beam and cause radar shadows or
'blind sectors'. If the obstruction is relatively narrow, there will
be a reduction of the beam intensity, though not necessarily a
complete cut-off. However, for wider obstructions there may
be a total loss of signal in the shadow area. There may also
be multiple echoes which extend behind the obstruction. Blind
sector effects can normally be minimized by careful selection of
the scanner site prior to installation.
Rain or Snow Clutter
D1638-5
The radar can see echoes from rain or snow. Returns from
storm areas and rain squalls consist of countless small echoes
that continuously change size, intensity and position. These
returns sometimes appear as large hazy areas, depending on
the intensity of the rainfall or snow in the storm cell. The images
in the table below show how the Rain control can clear up this
clutter:
Rain
clutter off
Rain
5
clutter on
6
D1641-5
Sea Clutter
Radar returns from waves around the vessel can clutter the
centre of the radar picture, making it difficult to detect real
targets. Such 'sea clutter' usually appears as multiple echoes
on the display at short range scales, and the echoes are
not repetitive or consistent in position. With high winds and
extreme conditions, echoes from sea clutter may cause dense
background clutter in the shape of an almost solid disc. Sea
clutter can be suppressed using the sea clutter settings. The
images in the table below show how the sea clutter settings can
clear up some of this clutter:
2
D1642-4
163