Autopilot Status Symbols - Raymarine a67 Wi-Fi Installation And Operation Instructions Manual

1. Select Menu > Navigate > Goto Cursor, Goto Waypoint, or
Follow Route as appropriate.
The Pilot Control dialog is displayed.
2. Select Engage Pilot.
A confirmation pop-up message is displayed.
3. Select Yes to confirm and engage the autopilot, or
4. Select No to leave the autopilot in the current state.
Engaging the autopilot using the context
menu
From the chart application context menu.
1. Select any of the following options from the Chart context
menu:
• Goto Waypoint
• Goto Cursor
• Follow Route
• Follow from Here
• Follow Route in Reverse
The pilot control dialog is displayed.
2. Select Yes (Track).
A confirmation pop-up message is displayed.
3. Select Yes to confirm and engage the autopilot.
Manually displaying the pilot control dialog
box
You can also open the Pilot Control dialog at any time from the
homescreen or chart application.
1. From the homescreen:
i. Select Set-up.
ii. Select Pilot Controls.
2. From the chart application:
i. Select Menu.
ii. Select Navigate.
iii. Select Pilots Controls.
Autopilot control

9.2 Autopilot status symbols

The autopilot status is indicated in the databar.
Symbol Description
Autopilot is in Standby mode.
Autopilot is in Track mode.
Autopilot is in Auto mode.
No autopilot detected.
Autopilot alarm active.
Dodge mode is active.
Fish mode is active.
Autopilot calibration.
Power steering active.
Wind Vane mode is active.
103