Memory Cards Overview; Inserting A Memory Card Or Chart Card - Raymarine a67 Wi-Fi Installation And Operation Instructions Manual

7.1 Memory cards overview

You can use memory cards to archive data such as waypoints,
routes, and tracks.
Memory cards can be used to archive your data when the
system capacity is reached. You can then delete old data from
your system, creating capacity for new data. The archived data
can be retrieved at any time. You can also use memory cards to
backup your data.
Note: Raymarine recommends that you backup your data to
a memory card on a regular basis.
92
7.2 Inserting a memory card or chart
card
Note: New a Series displays have 1 card slot, cards must be
inserted into New a Series displays with the contacts facing
up.
1. Open the chart card door, located on the front right of the
display.
2. Insert the card, as shown in the diagram below. For slot 1,
the card contacts should be facing DOWN. For slot 2, the
card contacts should be facing UP. Do NOT force the card. If
the card does not fit easily into the slot, check the orientation.
3. Gently press the card all the way in to the card slot, as shown
in the diagram below. The card is secure when an audible
click is heard.
4. To prevent the ingress of water and consequent damage,
close the chart card door.
New a Series / New c Series / New e Series
D12290-1
D12292-1