Raymarine a67 Wi-Fi Installation And Operation Instructions Manual page 223

Camera Set-up menu
Set Home Position
Slew Settings
Align Camera
Elev Align
Surveillance Settings
Default Color
Icon Level
Stabilization Mode
Point Mode
Ball Down Mode
High Power Standby
High Power Torque
JCU Icon
PC Icon
Restore Factory Defaults
Calibrate platform
Thermal camera application — Pan and tilt cameras
Sets the camera's current position as the Camera
Home position.
Provides automatic slew options and camera
alignment settings.
Enables changes to camera's horizontal alignment.
Enables changes to camera's elevation (vertical)
alignment.
Enables you to set the speed and width the
camera will scan when in surveillance mode.
Enables selection of default color palette.
Enables selection of level of icons displayed
on-screen.
Enables and disables stabilization mode.
Note: Only available on stabilized variants of
the T-Series cameras.
Enables and disables point mode.
This options should be enables when the camera
is mounted upside down in the 'ball down'
configuration.
This option controls the amount of power used to
hold the camera in position while it is in standby
mode. With the setting enabled the camera will
consume more power, but will help ensure that the
camera is held in place in rough seas.
This option controls the amount of power used to
hold the camera steady when in use. With the
setting enabled the camera will consume more
power, but will help ensure that the camera is held
in place in rough seas. The High Power Torque
mode may be useful for power boats that operate
at higher speeds and experience high impact
environments, and can accept higher power
consumption.
Shows or hides the on-screen JCU connected
icon.
Shows or hides the on-screen PC connected icon.
Enables you to restore the camera's settings to
factory default values.
The calibrate platform option re-initializes the pan
and tilt mechanism in the thermal camera.
• Auto Slew to MOB
• Auto Slew to dangerous AIS target
• Auto Slew to dangerous MARPA target
• Camera height above sea level
• Scan Speed
– Slow
– Medium
– Fast
• Scan Width
– Narrow
– Medium
– Wide
• Red
• Greyscale
• Glowbow
• Rainbow
• Fusion
• None
• Minimal
• All
• On (default)
• Off
• On
• Off (default)
• On
• Off (default)
• On (default)
• Off
• On (default)
• Off
• On (default)
• Off
• On (default)
• Off
223