Screenshots; Resetting Your System - Raymarine a65 Operation Instructions Manual

4.3 Screenshots

You can take a screenshot of what is currently
displayed on the screen.
Screenshots are saved in .png (Portable Network
Graphic) format to a MicroSD Card. The saved
images can be viewed from any device capable of
viewing .png images.
Taking a screenshot
You can take a screenshot by following the steps
below.
1. Insert a MicroSD card with suitable free space
into the card reader.
2. Press the Power button.
The Shortcuts page is displayed:
3. Select the Camera icon.
A confirmation message is displayed.
4. Select OK.
The screenshot is now saved to the MicroSD
card.
Tip If your display has a Back button you can also
take a screenshot by pressing and holding the Back
button until the confirmation message appears.
Selecting the SD card slot for screenshots
If your multifunction display has 2 card reader
slots, you must select which card slot to save the
screenshot to.
From the homescreen.
1. Select Customize.
2. Select Display Preferences.
3. Select Screenshot File:.
4. Select either MicroSD 1 or MicroSD 2.
Viewing an image on the MFD
You can view images such as screenshots on your
MFD.
1. Insert a MicroSD card containing the image into
the MicroSD card slot of your MFD.
2. From the Homescreen, select My Data.
3. Select My Files.
The file browser dialog is displayed.
4. Use the file browser to locate the file on the
MicroSD card.
5. Select the file you want to view.
The file will now open.
6. Select Back or Close to close the image.
Managing display data

4.4 Resetting your system

Your system may be reset to its factory default
settings if required.
There are 2 types of reset operation, both of which
affect the current display you are using, AND any
networked displays.
• Settings reset.
• Settings and data reset.
Settings reset
This option resets your setup menus, page sets, and
databar settings to factory default. It will NOT affect
your waypoints, routes, or tracks data.
Settings and data reset
In addition to the settings reset detailed above,
performing a settings and data reset will also remove
ALL waypoints, routes, and tracks data.
Resetting system settings
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings Reset.
A message is displayed prompting you to confirm
the action.
4. Select Yes to proceed with the settings reset, or
No to cancel.
Resetting system settings and data
Note: Performing a settings and data reset erases
ALL waypoints, routes, and track data from your
system. BEFORE proceeding with a settings and
data reset, ensure that you backup any data that
you want to keep on to a memory card.
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings and Data Reset.
A message is displayed prompting you to confirm
the action.
4. Select Yes to proceed with the settings and data
reset, or No to cancel.
57