1 - 8
RS507 Hands-Free Imager Product Reference Guide
Connect to a WT4090 Wearable Terminal
The Imager connects to the Wearable Terminal and mounts on the fingers.
Interface Cable Connector
Connecting and Disconnecting to a Wearable Terminal
Figure 1-8
To connect the Imager to the terminal:
On the terminal, remove the cover from the WT4090 Interface Connector.
1.
Connect the Interface Cable Connector of the Imager to the WT4090 Interface Connector.
2.
To disconnect the Imager from the terminal:
Press the Disconnect Button on the Interface Cable Connector.
1.
Pull the Interface Cable Connector out of the WT4090 Interface Connector.
2.
Wearing the Imager
To wear the Imager:
Slide the Imager onto the index and middle fingers with the Scan Trigger next to the thumb (see
1.
Scan Trigger
Wear the Imager - Corded Adapter
Figure 1-9
WT4090 Interface Connector
Disconnect
Button
1
2
Figure
1-9).