Refreshing Boot Choices; Hid (Human Interface Device) Mode; How To Change To Hid Mode - Motorola RS507-IM2xxxxSTWR Product Reference Manual

Refreshing Boot Choices

The following boot choices are referred to in this section:
Cold Boot
Cold Boot restores the RS507 operation by resetting its software. To perform a cold boot, remove and re-insert the
battery onto the RS507.
Clean Boot
Clean Boot restores the RS507 to its factory default configuration.
To perform Clean Boot:
Remove the battery from the RS507.
1.
Press and hold the Restore Key.
2.
Insert the Battery onto the RS507.
3.
Keep holding the Restore Key pressed for about five seconds until a chirp is heard and the Scan LEDs flash
4.
green. The RS507 is now in its factory default configuration.
Warm Boot
Warm boot restores the RS507 operation by resetting its software but retains the RAM content. Warm boot is used
when a log file has to be retrieved from the RS507 during application debugging.
To perform warm boot, press and hold the Restore Key for more than six seconds.

HID (Human Interface Device) Mode

NOTE Notebook computer manufacturers may provide their own brand of a BT stack with different connection
screens. However, all stacks provide the same functionality.

How to change to HID mode

Perform Clean Boot to the RS507:
1.
•
Remove the battery from the RS507.
•
Press and hold the Restore key.
•
Install the battery onto the RS507.
•
Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash
green.
Scan the HID bar code.
2.
HID bar code
RS507 Bluetooth Connection Using HID and SPP Profiles 7 - 3