User Preferences; Set Default Parameter - Motorola RS507-IM2xxxxSTWR Product Reference Manual

5 - 4 RS507 Product Reference Guide

User Preferences

Set Default Parameter

You can reset the Imager to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar
code below to reset the decoder to its default settings and/or set its current settings as custom defaults.
•
Set Defaults - Scan this bar code to reset all parameters to custom default settings.
•
Set Factory Defaults - Scan this bar code to restore the factory default values listed in
deletes any custom defaults set.
*Set Defaults
Table A-1.
Set Factory Defaults
This