Connecting Multiple Rs507 Into Single Device; How To Return To Ssi (Scan) Mode - Motorola RS507-IM2xxxxSTWR Product Reference Manual

Scan bar codes. Successful decoding of a bar code is indicated by one green flash of the Scan LEDs and a
4.
high beep sound. In case of BT disconnection, the RS507 emits one high beep followed by four low beeps.
Tera Term Entry Screen
Figure 7-46

Connecting multiple RS507 into single device

Multiple RS507 units can be connected a single computer running an application that accepts more than one
RS507, each with its own assigned COM port. The number of RS507 units concurrently connected is depended on
the computer's BT stack.

How to return to SSI (SCAN) mode

To change the RS507 to SSI (SCAN) mode:
Perform Clean Boot to the RS507:
1.
•
Remove the battery from the RS507.
•
Press and hold the Restore key.
•
Install the Battery onto the RS507.
•
Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash
green.
Scan the SSI (SCAN) bar code.
2.
SSI (SCAN) bar code
RS507 Bluetooth Connection Using HID and SPP Profiles 7 - 35