Terminal Emulation; Wireless Local Area Networks - Motorola MC92N0-G User Manual

Touch >
6.
Touch Enable Elemez.
7.

Terminal Emulation

The Wavelink Terminal Emulation application provides a solution for accessing and managing connections to
applications resident on host systems using 5250, 3270 and VT emulation.
Wavelink Terminal Emulation
Figure 3-29

Wireless Local Area Networks

Wireless local area networks (WLANs) allow the MC9200 to communicate wirelessly inside a building. Before
using the MC9200 on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes
known as infrastructure). The infrastructure and the MC9200 must both be properly configured to enable this
communication.
Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches, Radius
servers, etc.) for instructions on how to set up the infrastructure.
Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless & networks
settings configure the MC9200 to match the security scheme.
The MC9200 supports the following WLAN security options:
•
Open
•
Wireless Equivalent Privacy (WEP).
•
Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK).
•
Extensible Authentication Protocol (EAP).
• Protected Extensible Authentication Protocol (PEAP) - with MSCHAPV2 and GTC authentication.
• Transport Layer Security (TLS)
• TTLS - with Password Authentication Protocol (PAP), MSCHAP, MSCHAPv2 and GTC authentication.
The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status. See
for more information.
.
Operating the MC92N0-G with Android OS 3 - 31
Status Bar on page 3-2