Code 128 Emulation - Motorola RS507-IM2xxxxSTWR Product Reference Manual

Code 128 Emulation

Parameter # 7Bh
Enable this parameter to transmit data from certain MicroPDF417 symbols as Code 128.
(01h) on page 5-16 must be enabled for this parameter to work.
Enable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following prefixes:
]C1if the first codeword is 903-905
]C2if the first codeword is 908 or 909
]C0if the first codeword is 910 or 911
Disable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following prefixes:
]L3if the first codeword is 903-905
]L4if the first codeword is 908 or 909
]L5if the first codeword is 910 or 911
Scan a bar code below to enable or disable Code 128 Emulation.
NOTE Linked MicroPDF codewords 906, 907, 912, 914, and 915 are not supported. Use GS1 Composites
instead.
Enable Code 128 Emulation
(01h)
Symbologies 6 - 69
AIM Code ID Character
*
Disable Code 128 Emulation
(00h)