Select the interface method (Bluetooth in the following example).
3.
NOTE The following screen is displayed only when using the WT4090. In other mobile computers, Bluetooth
mode is selected by default. Press Yes (Bluetooth mode) to pair the Imager with the mobile computer (see
Restore Lost Bluetooth Connection on page
Selection of the Bluetooth Interface Mode
Figure 4-22
Press the Firmware button and verify that the application shows the version number of the current firmware of
4.
the Imager.
Firmware Update Screen
Figure 4-23
Copy the *.DAT file to the mobile computer using ActiveSync connection.
5.
Press the Firmware... button to select the new firmware *.DAT file and the OK button.
6.
Firmware Update Screen - Selection of *.DAT File
Figure 4-24
RS507 Update and Configuration 4 - 19
1-12).