How To Return To Ssi (Scan) Mode - Motorola RS507-IM2xxxxSTWR Product Reference Manual

7 - 16 RS507 Product Reference Guide
Scan the End of Message bar code if the PIN code has less than 16 characters.
7.
End of Message bar code
The RS507 emits a short high beep while scanning the alphanumeric bar codes and a high/low/high/low upon
scanning the End of Message bar code. When the passkey is scanned successfully, Success! is displayed on
the Bluetooth Security Setup screen.
HID - Using Random PIN Code - Bluetooth Security Screen / Passkey Scanned Successfully
Figure 7-19
Click Next to complete the association. The RS507 emits a short string of low/high beeps to indicate a
8.
successful pairing. When the connection is completed, the color of the BT icon on the quick launch bar of the
PC is blue and green.
HID - Using Random PIN Code - Successful Pairing BT Icon
Figure 7-20

How to return to SSI (SCAN) mode

To return to SSI mode so that connection to Motorola terminals can be established, perform the following:
Perform Clean Boot to the RS507:
1.
•
Remove the battery from the RS507.
•
Press and hold the Restore key.
•
Install the Battery onto the RS507.
BT Icon