How To Pair And Connect With Other Devices - Motorola RS507-IM2xxxxSTWR Product Reference Manual

The RS507 is ready to scan and send bar codes over the assigned serial port.
Find the assigned serial Outgoing port, right click the BT icon and select Bluetooth Configuration and the
8.
Local Services tab.
NOTE Do not confuse the BT serial port assigned as Incoming (RS507 initiates the connection) with the BT serial
port assigned as Outgoing (The computer initiates the connection and RS507 is discovered - Slave Mode).
Bluetooth Configuration Screen - SPP connection with RS507 as a Slave
Figure 7-44
Open the COM port assigned as Incoming COM port in the application (for example, COM7). After the COM
9.
port is opened the computer connects to the RS507 and a beep will sound. For demonstration, refer to
demonstrate SPP connection with a computer on page
If the COM port is not opened prior to the connection, the RS507 will fail to connect. Make sure
NOTE
the same COM port is closed in other applications.

How to pair and connect with other devices

The RS507 can pair and connect as a serial port device using the Bluetooth SPP profile to other devices that
support SPP using the device either the RS507 as a Master (recommended) or the device discovery feature.
The PC Tool application can be used to generate the Bluetooth Device (BD) address of the target device for
testing. Otherwise this bar code can be printed on a label and affixed to the device.
Not all devices support SPP. If the RS507 is not discovered as a serial port device (camera),
NOTE
check with the device vendor.
RS507 Bluetooth Connection Using HID and SPP Profiles 7 - 33
7-34.
How to