Imager Activity Modes
The Imager is capable of four modes of activity:
•
Busy (Run) Mode – The Imager is scanning or transferring data using Bluetooth.
•
Standby Mode – The Imager enters Standby mode (Low Power Mode) when it is idle for more than one
second. The Imager wakes-up and returns to busy (run) mode upon at least one of the following events:
• Scan trigger
• Motion activity
• Bluetooth activity
• Press of the Restore key
• Real time clock (a system inside the Imager)
•
Deep Sleep (Critical Off) Mode – The deep sleep mode is only applicable when the Imager is connected to
a mobile computer in cordless mode. When the battery power of the Imager is below 3V, the Imager turns off
and enters Standby mode. To recover from Deep Sleep mode, replace the battery with a charged battery
(See
"Remove the Battery" on page
•
OFF Mode – The Imager is not connected to power source.
6.)
Miscellaneous Imager Options
5 - 9