Upgrading Using A Computer And The Pc Tool Application - Motorola RS507-IM2xxxxSTWR Product Reference Manual

7 - 38 RS507 Product Reference Guide
IMPORTANT In Win XP SP3:, when switching between SPP connection and HID connection and vice versa, the RS507 device
must be removed from the computer pairing list, to remove the RS507 please do as follow:
Remove the RS507 from the BT stack by selecting it on the My Bluetooth Places > Entire Bluetooth
6.
Neighborhood, right click and select Disable.
Entire Bluetooth Neighborhood Screen - Switching Between SSI (SCAN), HID and SPP
Figure 7-49
Firmware pgrade

Upgrading using a computer and the PC Tool application

Older RS507 devices can be upgraded and re-flashed with a new firmware. The update is performed by
downloading the firmware to the RS507 flash memory. If download fails, the previous firmware remains
operational.
The firmware remains inside the RS507 memory even when powering the RS507 off/on (removing and re-installing
the battery).
To update the firmware of the RS507:
Install a fully charged RS507 battery and wait until the RS507 emits a beep and stops, indicating that the power
1.
up process is completed.
Press the Scan trigger and verify that the Scan LEDs illuminate and the aimer light is shown while the scan
2.
trigger is pressed.