RS507 Bluetooth Connection Using HID and SPP Profiles 7 - 49
Force Pairing Save
The Force Pairing Save parameter enables/disables saving the remote Bluetooth address after each Bluetooth
connection attempt.
When this parameter is disabled, the Bluetooth address is saved only after a successful Bluetooth connection. If
the Bluetooth connection fails, the Bluetooth address is not saved.
NOTE This parameter is effective when the RS507 connects as Master.
Disable
*Enable
Bell Indication Control
BELL Indication (SPP mode only)
The BELL Indication parameter configures the beep tone sequence of the bell indication when a bell character is
received. This feature is valid only in SPP mode for PC connection.
*Disable
Enable
GP_1_HI_SHORT
GP_2_HI_SHORT