Table of Contents
Advertisement
Attribute
ATTR_SCAN_TRIG_WAKEUP_EN
ATTR_BLUETOOTH_AUTO_RECO
N
ATTR_PROXIMITY_CONTINUOUS
_EN
ATTR_GOOD_SCANS_DELAY
ATTR_FORCE_PAIRING_SAVE
ATTR_PAGING_ACTIVATE
ATTR_BT_DISCONNECT
ATTR_BT_UNPAIR
ATTR_FIRM_VERSION
ATTR_DEVICE_CLASS
Access
Values
R/W
1 - Enabled
0 - Disabled
R/W
0 –None
1 - Power on
2 - On when back in
range
3 - On when power is on
and back within range
R/W
1 - Enabled
0 - Disabled
R/W
Values 0 -150 (in 100
msec intervals)
0 – No delay
1 – 150 (100 – 15000
msec)
R/W
0 – Disabled
1 – Enabled
W
0 – Stop
1 – Start
W
0 - Disconnected
W
0 - Unpaired
R
N/A
R
N/A
RS507 Update and Configuration
Factory
Description
Default
1
Scan trigger serves as
an Imager wake-up
source from low power.
2
Defines Bluetooth
reconnection scheme
(Permanently saved)
Important: If option 1
(On Power) or 3 (On
when power is on and
back within range) is set,
the pair should be
properly marked and
kept visible on the
Imager and mobile
computer to avoid user
selecting of an unpaired
set.
0
Proximity continuous
mode (for scanning
packages off conveyer
belt).
0
Delay between good
scans in proximity
continuous mode (msec).
1
Force BD_Address
saving when pairing fails
(Permanently saved).
Start / stop Imager
paging
Bluetooth disconnect
command from terminal
to Imager
Bluetooth un-pair
command from terminal
to Imager.
Imager Firmware
version.
Imager system class
4 - 9
Hide quick links:
Advertisement
Table of Contents
