Connect To A Wearable Terminal - Motorola RS507 Quick Reference Manual

10

Connect to a Wearable Terminal

The Imager connects to a terminal and mounts on the fingers.
To connect the Imager to the
terminal:
On the terminal, remove the
1.
cover from the Terminal
Interface Connector.
Connect the Interface Cable
2.
Connector of the Imager to the
Terminal Interface Connector.
To disconnect the Imager from the terminal:
Press the Disconnect Button on the Interface Cable Connector.
1.
Pull the Interface Cable Connector out of the terminal.
2.
Wear the Imager
Slide the Imager onto the index and middle fingers with the Scan Trigger next
1.
to the thumb.
Scan Trigger
Tighten the Finger Strap.
2.
Finger Strap
NOTE When using the Imager for the first time, press and release the Scan
Trigger to enable the manual triggering mode (this operation disables the
default auto triggering mode).
RS507 Hands-Free Imager
Terminal Interface Connector
Interface Cable Connector
Disconnect
Button
Q 4t×