Rep 16 Fuser - Xerox WORKCENTRE PE 220 Service Manual

5. Release the four Gears (RDCN, OPC,
Fuser, Feed) from the Frame.
Figure 4
6. Remove four screws securing the Motor
Bracket and remove it. Then remove two
screws securing the Motor and remove it.
Figure 5
Workcentre PE 220

REP 16 Fuser

1. Before you remove the Fuser, you should
remove:
- Scan Assembly (Refer to
- Middle Cover (Refer to
2. Unplug the two Connectors from the
SMPS and Main PBA.
3. Remove four screws securing the Fuser
and remove it.
11/05
Repairs/Adjustments
REP 8)
REP 12)
Figure 1
Figure 2
4-17