Scp 1 Service Call Actions - Xerox WORKCENTRE PE 220 Service Manual

SCP 1 Service Call Actions

Procedure
Throughout this manual, observe the following Warnings:
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Do not touch the fuser while it is hot.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Take note of symptoms or error messages.
2. Ask the operator to describe or demonstrate the problem.
3. Make sure that:
• The power cord is connected to the wall outlet and to the machine.
• All cables are connected correctly.
4. If available, check the machine service log book for any previous actions that may be relevant
to the call.
5. Review any defective print or copy samples.
6. Perform 1 Initial Checks
Workcentre PE 220
WARNING
WARNING
WARNING
RAP.
11/05
Service Call Procedures
1-3