Iq 13 Contamination On The Face Of Page; Iq 14 Contamination On Back Of Page - Xerox WORKCENTRE PE 220 Service Manual

Workcentre
Hide thumbs Also See for WORKCENTRE PE 220:
Table of Contents

Advertisement

IQ 13 Contamination on the Face of Page

Description
The background on the face of the printed page is contaminated.

IQ 14 Contamination on Back of Page

Description
The back of the page is contaminated at 47 mm intervals.
Workcentre PE 220
Check and Cause
1. Toner leakage due to improperly
sealed developer.
2. The transfer roller maybe con-
tamInated.
3. The fuser roll may be contami-
nated
Check and Cause
1. Transfer roller is contaminated.
2. Pressure roller is contaminated.
11/05
Solution
1. Install a new print cartridge,
2. Run DRUM Cleaning Mode,
Make 2 or 3 prints
3. Inspect and clean the fuser roll,
PL
7. Replace if necessary.
Solution
1. Run DRUM Cleaning Mode,
Make 2 or 3 prints
2. Replace the transfer roller,
CAUTION
Take care not to bend or break the
thermistor.
3. Clean the heat roll, pressure roll
and thermistor. If necessary install a
new fuser,
PL
1.
Image Quality
PL
1.
GP
3.
GP
3.
PL
6.
3-13

Advertisement

Table of Contents
loading

Table of Contents