Status Indicator RAPs
3 JAM 1 RAP
Description
Paper is jammed in front of or just inside the fuser.
Paper is jammed in the discharge roller and in the fuser just after passing through the Actuator-
Feed.
Check and Cause
1. Check for small pieces of paper jammed in
the fuser.
2. If paper is jammed in front of or inside the
fuser.
3. If paper is jammed in the discharge roller
and the fuser just after passing through the
Actuator Feed, the Feed Actuator may be
defective.
2-6
1. Clear paper from the fuser.
2. Replace the SMPS,
3. Check the actuator for damage,
11/05
Solution
PL
1.
PL
Workcentre PE 220
6.