Rep 15 Rx Drive - Xerox WORKCENTRE PE 220 Service Manual

Repairs/Adjustments

REP 15 RX Drive

1. Before you remove the RX Drive, you
should remove:
- Scan Assembly (Refer to
- Middle Cover (Refer to
- Main PBA (Refer to
2. If necessary, remove Bracket Port,
Bracket Main PBA and Ground.
Figure 1
4-16
REP 8)
REP 12)
REP 14)
3. Remove two screws securing the Engine
Shield and remove six screws securing
the Frame, then remove the RX Drive in
the direction of the arrow.
4. Remove the Connector.
11/05
Figure 2
Figure 3
Workcentre PE 220