Rep 8 Scan Assembly - Xerox WORKCENTRE PE 220 Service Manual

Repairs/Adjustments

REP 8 Scan Assembly

1. Before you remove the Scan Assembly,
you should remove:
- Rear Cover (Refer to
- Right Cover (Refer to
- Left Cover (Refer to
2. Remove two screws from the Middle
Cover and remove the screw securing the
Ground Cable.
Figure 1
4-8
REP 5)
REP 6)
REP 7)
3. Unplug the three Connectors (ADF, Scan
Motor, OPE) and Flat Cable-CIS.
4. Release the Scan Assembly in the direc-
tion of the arrow.
11/05
Figure 2
Figure 3
Workcentre PE 220