Control Panel Functions; Gp 5 Control Panel - Xerox WORKCENTRE PE 220 Service Manual

General Procedures and Information

GP 5 Control Panel

Control Panel Functions

Lighten/Darken
Original Type
Reduce/Enlarge
Favourite Copy
Enter
Menu
Exit
Start
Stop/Clear
Number Keypad
Resolution
Broadcasting
Phone Book
Redial/Pause
Manual Dial
Scan
Toner Save
Copy
Fax
6-40
Figure 1
Adjusts the brightness of the documents for the current copy job.
Selects the document type for the current copy job.
Makes a copy smaller or larger than the original.
Allows you to use one of teh special copy features, such as Clone, Colla-
tion, Auto fit, 2 Sides on 1 page, 2/4 Up (multiple pages on a sheet), and
Poster copying after assigning it.
Displays the current status and prompts during an operation.
Used to scroll through tthe available options for the selected menu item.
Confirms the selection on the display.
Enters Menu mode and scrolls through the menus available.
Sends you back to the upper menu level.
Starts a job.
Stops an operation at any time.
In Standby mode, clears/cancels the copy options,
such as the darkness, the document type setting,
the copy size and the number of copies.
Dials a number or enters alphanumeric characters.
Adjusts the resolution of the documents for the current fax job.
Allows you to send a fax to multiple destinations.
Allows you to store frequently dialled fax numbers as one or two-digit
speed dial or group dial numbers for automatic dialling and edit the stored
numbers. Also allows you to print a Phonebook list.
In Standby mode, redials the last number or in Edit mode, inserts a pause
into a fax number.
Engages the telephone line.
Selects the scan feature software (Printer Settings Utility) provided.
Allows you to save on toner by using less toner to print a document.
Selects the copy feature.
Selects the Fax feature.
11/05 Workcentre PE 220