Xerox WORKCENTRE PE 220 Service Manual page 38

Status Indicator RAPs
15F Defective FAX RECEIVE (2)
Description
Received data is corrupted.
Check and Cause
1. Check for NOISE on the line. Press Manual
Dial and listen.
2. Ask sender to send to another fax machine
(if possible connected to the same wall
socket)
15G Defective FAX RECEIVE (3)
Description
The phone is ringing continuously, but the machine does not answer the call.
Check and Cause
1. Check that the RECEIVE Mode is set to
FAX MODE.
15H Defective FAX RECEIVE (4)
Description
Received data is reduced by more than 50% in the printing.
Check and Cause
Check the FAX status of the forwarding side.
2-22
1. If you can hear a noisy line when using
Manual Dial, replace or repair the telephone
line.
2. Replace LIU or main PBA ,
1. If the fault persists even when the
RECEIVE Mode is changed to FAX MODE
then replace the LIU and the Main PBA,
This is a problem with the sending fax
machine. Inform the customer.
11/05
Solution
PL 1.
Solution
Solution
Workcentre PE 220
PL 1.