Hybrid Spot
6.9.3 Pro Pull Assembly
6.9.4 Dent Pulling with Pro Pull
1
Aim, position & fire!
6.9.5 Paintless Dent Pulling With Pro Pull
All Info Copyright © Pro Spot International Inc.
A
F
1. Attach the Weld Gun (D) to Weld Shaft (C). Secure Lock Bolt (G).
2. Slide weld shaft and gun to standard distance (E).
3. Attach desired block plate (A)
4. Position the weld tip in the "bottom" of the dent, weld, then pull the handle (F)
to initiate the pulling action. Use the shortest weld TIME possible to prevent
extensive weld marks.
2
Pull dent with Auto
Blocking.
Glue Adapter for Paintless
Dent Removal
6 Single-Sided Welding
C
D
approx.
0.7"(17mm)
3
Twist gun to release tip.
E
Page 32
34