Local Or Central Station Reporting System - Gemini GEM-P9600 Programming Instructions Manual

WI777D 08/00
(Press YES or NO)
(Direct Entry)
(Direct Entry)
(Direct Entry)
(Direct Entry)
L
NAPCO Security Systems
REPORT
Local System or C.S. Reporting System (Appears for New Panel Only)
Press YES (
for no zones to report (LOCAL SYSTEM).
ALL ZN?
Y/N
Exit/Entry Zones (Appears for New Panel Only)
ENT EE
Directly enter the zone numbers which are to be used as Exit/Entry zones.
Valid entries are from 01 to 96. Directly enter each zone number, including
leading zeros. Use number buttons
the
0
ZN# 00
additional zone(s). Press NEXT (
NOTE: Exit/Entry Zones will have an entry delay of 30 seconds and an exit
delay of 60 seconds. Chime will automatically be programmed for all E/E
zones. If you are programming a 2 Area system, enter all of the zones
required for Areas 1 & 2.
Interior Zones (Appears for New Panel Only)
ENTFOL
Directly enter the zone numbers which are to be used as Interior Zones.
Valid entries are from 01 to 96. Directly enter each zone number, including
leading zeros. Use number buttons
the
0
ZN# 00
additional zone(s). Press NEXT (
NOTE: All Interior zones will also be automatically programmed as "Exit/
Entry Follower" zones. If you are programming a 2 Area system, enter all
the zones required for Areas 1 & 2.
Number of Keypads in Area 1
Directly enter the total number of Keypads to be installed in Area 1. Valid
ENT A1
entries are from 01 to 15. Directly enter the number of keypads, including
leading zeros. Use number buttons
the
0
#KP 01
to proceed.
Number of Keypads in Area 2
ENT A2
Directly enter the total number of Keypads to be installed in Area 2. Valid
entries are from 01 to 15. Directly enter the number of keypads, including
leading zeros. Use number buttons
the
0
#KP 00
to proceed.
) button for all zones to report; press NO (
E
button for a zero. Press
E
button for a zero. Press
E
J
button for a zero. Press
J
button for a zero. Press
X
GEM-P9600 Programming Instructions
F
through . NOTE: Press
1 9
J
to save and then repeat for any
) button to proceed.
through . NOTE: Press
1 9
J
to save and then repeat for any
) button to proceed.
through . NOTE: Press
1 9
to save . Press NEXT (
E
through . NOTE: Press
1 9
to save . Press NEXT (
E
!
Page 15
) button
) button
) button