Cs Reporting Codes (Addr 0870-0904) - Gemini GEM-P9600 Programming Instructions Manual

WI777D 08/00
ADDRESS
SYSTEM
0870-0880
REPORTING CODES
LEFT
Test Timer
Alarm Supervisory
Bus Failure
Memory Failure
Panel Low Battery
Panel AC Failure
EZM Tamper
Sensor Watch
RESERVED
blank (•)
RESERVED
blank (•)
Telco Line Failure
CS REPORTING CODES:
!
1. Enter in corresponding address location (left and right digits).
!
2. Valid entries are: 1-9, 0 and B-F.
NOTE: Dark shaded data value box shows option not available.
CAUTION: For all 2-Digit Reporting Formats (see CS Receiver Format Options), use the following:
Example: The 2-digit reporting code as shown is "21".
CS AREA & SYSTEM REPORTING OPTIONS (ADDR ESS 1024-1027)
DISABLE OPENING
LEFT DATA
ADDRESS 1024
AREA VALUES
"
(CIRCLE )
LEFT DIGIT
Area 1 1
Area 2 2
Area 3 4
Area 4 8
[Default = blank (•) blank (•)]
CS SYSTEM REPORT OPTIONS
Cancel Next Test Timer on any Report
Disable Wait for Silence
Disable Wait for Handshake
Handshake for Local Telemetry
CS AREA & SYSTEM REPORTING OPTIONS:
!
1. Select the desired option by circling
right).
!
2. Add the data values (ex: 15=1+2+4+8) from the selected options.
!
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available.
L
NAPCO Security Systems
CS REPORTIN G CODES (A DDRESS 0870-0904)
SYSTEM
REPORTING CODES
ADDR RIGHT
Digital Dialer Test
0870
GuardTour Fail
0871
RESERVED
0872
Service Message
0873
Program Change
0874
RF Receiver Trouble
0875
RF Receiver Tamper
0876
RF Trouble
0877
0878 blank (•)
[Default = blank (•) blank (•) from address 0870-0904]
0879 blank (•)
0880
Reporting
2nd Digit of Reporting Code
REPORTS
LEFT DATA
VALUES
"
(CIRCLE
RIGHT
1
DIGIT
2
4
8
LEFT DATA
VALUES
"
)
LEFT DIGIT (SUM
(CIRCLE
OF DATA VALUES)
1
2
4
[Default = blank (•) blank (•)]
8
"
the data values for each digit (left and
ADDRESS
0890-0897
LEFT ADDR RIGHT
0890
0891 blank (•)
0892 blank (•)
0893
0894
0895
0896
0897
ADDRESS LOC.
LEFT RIGHT
Code
1 2
1st Digit of Reporting Code
LEFT DATA
AREA AREA VALUES
"
)
(CIRCLE )
Area 5 Area 1 1
Area 6
Area 2 2
Area 7 Area 3 4
Area 8 Area 4 8
ADDRESS 1027
RIGHT DIGIT (SUM
OF DATA VALUES)
X
GEM-P9600 Programming Instructions
ADDRESS
KEYPAD
0900-0904
REPORTING CODES
LEFT
Ambush
Panic
Fire
Auxiliary
Tamper
DISABLE CLOSING
REPORTS
LEFT DATA
ADDRESS 1025
(CIRCLE
LEFT DIGIT RIGHT
DIGIT
[Default = blank (•) blank (•)]
RIGHT DATA
CS SYSTEM REPORT OPTIONS
VALUES
"
)
(CIRCLE
1 Backup Report on Telco 2
2 TouchTone Dialing Only *
4 TouchTone Dialing w/Rotary Backup *
Transmit "402" Opening/Closing Code
8
* NOTE: If neither TouchTone Dialing nor
TouchTone w/Rotary Backup is selected, then
system defaults automatically to Rotary Dialing.
Leave blank (•) to select Rotary Dialing.
!
Page 41
ADDR RIGHT
0900
0901
0902
0903
0904
VALUES AREA
"
)
1 Area 5
2 Area 6
4 Area 7
Area 8
8