Table of Contents
Advertisement
2.
Insert the front panel framework into the bezel as shown:
Figure 4-19 Fitting Front Panel Supporting Metalwork
1.
Front Panel Supporting
Metalwork
3.
Fasten the framework onto the bezel using the two screws.
4.
Attach the top hinge of the removable media drive bay door to the
front panel supporting metal work you just fitted.
5.
Fit the circlip into the hinge as shown in the following illustration:
Figure 4-20 Fitting Circlip
1.
Circlip
S e r v i c e I n f o r m a t i o n
2
1
2.
Securing Screws
2
1
2.
Top Hinge of Drive Bay Door
OWNER'S HANDBOOK 4-19
Advertisement
Table of Contents
