Table of Contents
Advertisement
Refitting the Side Panel
Use the following steps to refit the side panel:
1.
Ensure that the lip on the inner surface of the side panel fits over the
chassis ridge.
2.
Fit the panel snugly into place.
3.
Tighten the floating fasteners.
4.
Insert the side panel key into the lock and turn it clockwise as far as
it will go.
5.
Push the lock inward until you feel the resistance of the metalwork.
6.
Turn the lock ¼ turn anti-clockwise and remove the key.
7.
Use the SMA and the front door key, as appropriate, to ensure that
Security is enabled.
U p g r a d i n g Y o u r S y s t e m
OWNER'S HANDBOOK 3-3
Advertisement
Table of Contents
