Table of Contents
Advertisement
Fitting
1.
If necessary, remove the knockout panel which covers the drive
module data connector opening in the centre spine of the server.
You will only need to do this the first time you fit a module in this
position.
Figure 4-8 Knockout Panel and Power Socket
1.
Knockout Panel
2.
Slide the drive module into place as far as it will go, at the same
time guiding the data connector through the opening in the centre
spine.
S e r v i c e I n f o r m a t i o n
1
2
2.
Power Socket
OWNER'S HANDBOOK 4-9
Advertisement
Table of Contents
