Table of Contents
Advertisement
7.
Attach two pairs of bus bars and fit one set of 3 bus bars as shown:
Figure 4-67 - Bus Bars
1.
Motherboard Bus Bars
As with the cables, it is not possible to fit these bars incorrectly.
8.
Fit the motherboard cooling fan assembly.
9.
Refit any expansion cards you may have removed to improve access.
Caution
If you have removed any SCSI hard disk controller cards or cables, be absolutely
sure that you restore the hard disk cable and connector arrangement as it was
originally, particularly if you have a RAID configuration. Failure to do so will
cause massive data loss.
S e r v i c e I n f o r m a t i o n
1
2.
Bus Bars for Hard Disk
Power Distribution Panel
OWNER'S HANDBOOK 4-67
2
Advertisement
Table of Contents
