Table of Contents
Advertisement
O p e r a t i n g Y o u r S y s t e m
The following paragraphs explain each item on the front of the machine:
♦
Diagnostic Codes LCD - Displays diagnostic codes that indicate
errors or normal stages in the boot process (see the separate
document Diagnostic Codes Reference Guide).
♦
P
O
OWER
N
from Standby mode to On mode.
♦
S
button - Holding this button down powers down the
TANDBY
server from On mode to Standby mode. This button also has special
functions in conjunction with other buttons (see Special Button
Functions later in this chapter).
♦
C
ONTROL
sound because of internal errors. It also has special functions in
conjunction with other buttons (see "Special Button Functions" later
in this chapter).
♦
R
button - Performs a hard reboot of the system. This button
ESET
also has special functions in conjunction with other buttons (see
"Special Button Functions" later in this chapter).
♦
P
LED - Indicates whether the server is On or is in Standby
OWER
mode.
♦
UPS LED - Indicates whether the system is receiving power from
the battery pack or from the mains electricity supply. It also
indicates the status of the battery pack.
♦
Lockable drive bay door - Provides security against unauthorized
access to the removable media drives. The key to this door serves as
the token used to control the built-in security subsystem (see
"Security" later in this chapter).
♦
Air Intake Vents - Openings in the front bezel through which the
system draws air in order to prevent overheating. These must not be
blocked or restricted in any way.
♦
Removable Side Panel - Provides protection for the internal
components and security against unauthorized access to the interior
of the server.
2-2 OWNER'S HANDBOOK
button - Pressing this button switches the machine
button - Pressing this button silences alarms which
Advertisement
Table of Contents
