Settings From The Control Panel; Setting Up The Ethernet Driver - Canon CLC3220 Network Manual

Settings from the Control Panel

The procedures for specifying the settings from the control panel are as follows.
IMPORTANT
Settings specified from the control panel become effective after the machine is restarted, after the
procedure.
NOTE
For instructions on how to enter characters using the touch panel display, see Chapter 2, "Basic
2
Operations," in the Reference Guide.

Setting Up the Ethernet Driver

1
2
2-10
Interface Settings
Press .
Press [System Settings].
NOTE
If the message <Enter the System Manager ID and Password using the numeric keys.> appears
on the touch panel display, enter the System Manager ID and password. For instructions on how
to enter the System Manager ID and password, see Chapter 2, "Basic Operations," in the
Reference Guide.