Setting Up A Computer For Printing/Sending A Fax; Connecting To A Netware Network; Printer Connection Method - Canon CLC3220 Network Manual

Setting Up a Computer for Printing/Sending a
Fax
After you have completed NetWare print service settings and printer protocol settings, you are
ready to set up each of the computers for printing or sending a fax.
IMPORTANT
To print or send a fax from a computer, the optional equipment must be installed. For the equipment
needed, see "Optional Equipment and System Environment Requirements," on p. 1-2.

Connecting to a NetWare Network

In order to use the NetWare network, all computers that will perform printing or sending a fax
need to have NetWare client software installed. For details, see your NetWare and operating
system manuals.

Printer Connection Method

Install the driver according to the following procedures indicated in the manual for each driver:
•
If you want to use the PCL printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the PCL Driver
Guide.
•
If you want to use the PS printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the PS Driver
Guide.
•
If you want to use the UFR printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the UFR Driver
Guide.
•
If you want to use the fax driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the Fax Driver
Guide.
When the dialog box for selecting the port appears during installation, click [Use Network
Printer] ➞ [Settings]. From the list, select the print queue that you created in "NetWare Print
Service Settings," on p. 4-3.

Setting Up a Computer for Printing/Sending a Fax

4
4-17