Windows 2000/Xp/Server 2003 - Canon CLC3220 Network Manual

■ Changing the Port after Installing the Driver
1
3
The installation of the driver and the port settings is complete.

Windows 2000/XP/Server 2003

■ Installing a New Driver
1
3-36
Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX)
Install Canon LPR2, and change the port settings.
For instructions on how to install Canon LPR2 and set ports, see the Canon LPR2 User's Guide
(PDF manual). For instructions on how to display the Canon LPR2 User's Guide, see the
Network Quick Start Guide.
IMPORTANT
If you want to use LPD, enter one of the following in [LPR Queue Name] in the [Add Port] dialog
box of Canon LPR2.
- LP
The machine prints according to its spool settings. Normally enter <LP> as a print queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk, regardless of its spool
settings.
- DIRECT
The machine prints without spooling a print job on the hard disk, regardless of its spool
settings.
Install the driver.
Install the driver according to the following procedures indicated in the manual for each driver:
• If you want to use the PCL printer driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the PCL Driver
Guide.
• If you want to use the PS printer driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the PS Driver
Guide.
• If you want to use the UFR printer driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the UFR Driver
Guide.
• If you want to use the fax driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the Fax Driver
Guide.