● If you want to restrict the IP addresses of computers on which the machine
setting items can be set or browsed using the Remote UI or utility:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [IP Address Range Settings] appears
➞ press [IP Address Range Settings].
❑
Press [Permit IP Address(es)] for <Setting/Browsing Range>.
❑
Select [On] for <Apply Settings>.
❑
Press [Register].
❑
If you want to store only one IP address, press [Single Address] to enter the IP address that
is to be permitted ➞ press [OK].
❑
If you want to store a range of IP addresses that are to be permitted, press [Multiple
Addresses] to specify [First Address] and [Last Address] ➞ press [OK].
❑
Press [OK].
❑
Press [Reject IP Address(es)] for <Setting/Browsing Range>.
❑
Select [On] for <Apply Settings>.
❑
Press [Register].
3-21
Protocol Settings
3