Canon CLC3220 Network Manual page 60

3
● If you do not want to use LPD as the print application:
14
● If you want to use Raw as the print application:
3-10
Protocol Settings
❑
Press [On].
❑
If you want to print a banner page (the print job must be set to output a banner), press [On];
otherwise, press [Off].
Output of a banner page is set on a print-job basis. Even if [On] is selected for [LPD Banner
Page], a banner page cannot be output for a print job, when it is not set to output.
❑
Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [LPD Settings] appears ➞ press [LPD
Settings].
❑
Press [Off].
❑
Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
Specify the Raw settings.
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [RAW Settings] appears ➞ press [RAW
Settings].
❑
Select [On].