Setup Using Netware Administrator Or Pconsole; Using Netware Administrator In The Nds Queue Server Mode Or The Remote Printer Mode (Netware 4.X Or Later) - Canon CLC3220 Network Manual

Setup Using NetWare Administrator or PCONSOLE

Using NetWare Administrator in the NDS Queue Server Mode or
the Remote Printer Mode (NetWare 4.x or Later)
1
Log in to NetWare as Administrator (or equivalent access) ➞ start
NetWare Administrator.
2
Execute Quick Setup.
❑
Select the container object for the printer object you want to create ➞ click [Print Services
Quick Setup] on the [Tools] menu.
3
Specify the [Print Server name], [Printer], and [Print Queue] settings.
❑
Enter the print server name in [Print Server name].
To use an existing print server, click the button to the right of [Print Server name] ➞ select a
print server from the list box.
❑
Under [Printer], enter the printer name in [Name].
❑
From [Type], select the printer connection method.
If you are using the queue server mode, select [Other/Unknown] from [Type].
If you are using the remote printer mode, select [Parallel] from [Type] ➞ click
[Communication] to open the [Parallel Communication] dialog box ➞ select [LPT1] from
[Port], and [Manual load] under [Connection type]. Under [Interrupts], specify the
appropriate setting for your environment ➞ click [OK] to close the [Parallel Communication]
window.
❑
Under [Print Queue], enter the queue name in [Name]. In [Volume], enter the volume in
which the queue is placed.
To use an existing print server, click the button to the right of [Volume] ➞ select a print server
from the list box.
❑
Click [Create] ➞ exit NetWare Administrator.
NOTE
Be sure to remember the name of the print server. You need it to specify the machine's protocol
settings.
NetWare Print Service Settings
4
4-5