Using Pconsole In The Queue Server Mode Or Remote Printer Mode In The Bindery Mode (Netware 3.2) - Canon CLC3220 Network Manual

4
NetWare print service settings are complete. Proceed to "Protocol Settings," on p. 4-9.
Using PCONSOLE in the Queue Server Mode or Remote Printer
Mode in the Bindery Mode (NetWare 3.2)
1
4
2
3
4-6
NetWare Print Service Settings
If you are using the remote printer mode, start the print server.
❑
If you are using the NetWare file server as a print server, enter <Load PSERVER.NLM> in
the file server ➞ press [ENTER] on the keyboard.
NOTE
If you are using the queue server mode, this step is not required.
Log in to NetWare as Supervisor, and then start PCONSOLE.
If you have not set up a print server yet, set up the print server.
❑
On the [Available Options] menu, select [Print Server Information] ➞ press [ENTER] on the
keyboard.
❑
Press [INSERT] on the keyboard.
❑
Enter the name of the print server you are setting up ➞ press [ENTER] on the keyboard.
❑
Press [ESC] on the keyboard to return to the [Available Options] menu.
NOTE
Be sure to remember the name of the print server. You need it to specify the printer's protocol
settings.
Set up a Queue, and then assign the print server to the queue.
❑
On the [Available Options] menu, select [Print Queue Information] ➞ press [ENTER] on the
keyboard.
❑
Press [INSERT] on the keyboard.
❑
Enter the name of the queue you are setting up ➞ press [ENTER] on the keyboard.
❑
Select the name of the queue you specified ➞ press [ENTER] on the keyboard.
❑
Select [Queue Servers] ➞ press [ENTER] on the keyboard.