Connecting To A Usb Interface (Optional) - Canon CLC3220 Network Manual

Connecting to a USB Interface (Optional)

If you install a USB Interface Board on the machine, you can connect the machine to a
computer with a USB port via a USB cable. The machine is USB Full Speed (USB 1.1
equivalent) compatible. The printer drivers, USB class driver, and utility that matches the
operating system on your computer will be installed. For more information on installing the
printer driver through a USB connection, see Chapter 2, "Getting Started," in the PCL Driver
Guide, the PS Driver Guide, or the UFR Driver Guide.
CAUTION
If you connect or disconnect the USB cable while the main power switch is ON, do not touch
the metal parts around the connector, as this may result in electrical shock.
IMPORTANT
• Do not connect or disconnect the USB cable in the following situations, as it may cause your computer
or the machine to operate poorly:
- When installing the printer driver
- When the computer is booting up
- When printing
• If you disconnect the USB cable with the computer or machine's main power switch ON, always wait at
least five seconds before reconnecting the cable. Immediately reconnecting the cable may cause your
computer or machine to operate poorly.
Printer Driver Software
USB Connector
USB Cable
USB Port
Connecting the Machine to a Computer or Network
2
2-7