Setting Up A Computer For Printing/Sending A Fax; Connecting To A Tcp/Ip Network; Connecting To A Netbios Network - Canon CLC3220 Network Manual

Setting Up a Computer for Printing/Sending a
Fax
After you have completed the protocol settings, you are ready to set up each of the computers
for printing or sending a fax.
IMPORTANT
To print or send a fax from a computer, the optional equipment must be installed. For the equipment
needed, see "Optional Equipment and System Environment Requirements," on p. 1-2.

Connecting to a TCP/IP Network

All computers that use the machine for printing or sending a fax must have TCP/IP client
software installed and must be enabled for TCP/IP network use. For details, see the manuals
5
provided with the operating system.

Connecting to a NetBIOS Network

All computers that use the machine for printing or sending a fax must be enabled for NetBIOS
network use.
See the procedures referenced below to set the computers.
•
Windows 98/Me: See "Windows 98/Me," on p. 5-11.
•
Windows 2000/XP/Server 2003: See "Windows 2000/XP/Server 2003," on p. 5-12.
•
Windows NT 4.0: See "Windows NT 4.0," on p. 5-13.
IMPORTANT
The following procedures describe a sample NetBIOS setup. Depending on your environment, the
actual setup procedure may differ.
5-10

Setting Up a Computer for Printing/Sending a Fax