Network Environment Setup Procedures
Before using the machine in a network environment, it is necessary to perform the following
setup procedures.
2
1
2
3
IMPORTANT
If you configure the interface settings for the first time, use the control panel of this machine. After
configuring the TCP/IP settings, you can change the content by using a web browser (Remote UI).
2-2
Network Environment Setup Procedures
Network Cable Connection (See "Connecting the Machine to a Computer or Network," on p. 2-3.)
Connect the machine to the network using the network cables.
Interface Settings (See "Interface Settings," on p. 2-9.)
Specify the interface settings for communication between the machine and computers on your network. To specify the settings,
use:
•
The machine's control panel
•
A web browser (Remote UI)
Communication Environment Setup (See "Communication Environment Setup," on p. 2-17.)
Set up a configuration for communication between the machine and computers on your network.