Table of Contents
Advertisement
Chapter 8 Menu Description Tables
8-2-3 REC FUNCTION
Items/
Adjustable
Data Saved
Range
PRE REC
ON
Select whether or not to enable PRE
RECORDING.
MODE
OFF
ON: PRE RECORDING enabled.
OFF: PRE RECORDING disabled.
<Note>
Specify the PRE RECORDING time by
using the menu option PRE REC TIME.
– C U F –
PRE REC TIME 1SEC
Set PRE RECORDING.
:
1-15SEC:
8SEC
Set the length of time that can be
:
retrospectively recorded before the
15SEC
REC START button is pressed.
<Note>
The maximum selectable range is 8
seconds when the REC MODE in the
<SYSTEM MODE> screen is set to
– C U F –
50M (DVCPRO50).
LOOP REC
ON
Select whether or not to enable LOOP
REC.
MODE
OFF
This setting can be used with PRE
RECORDING features.
ON: Enable LOOP REC.
OFF: Disable LOOP REC.
<Note>
After the power is turned off, this item
will default to OFF the next time the
– – – F –
power is turned on.
VOICE MEMO
ON
Set the available memory space for
voice memos in P2 cards.
RESERV
OFF
ON: Reserve a voice memo area of 10
OFF: Do not reserve any voice memo
<Note>
Even when this item is set to OFF, and
FULL is displayed for the P2 card's
recording capacity, it may be possible to
record voice memos depending on the
status of the P2 card.
– C U F –
REC START
ALL
Select operating modes that allow
NORMAL
recording to start.
ALL: Allow recording to start during
NORMAL:
Allow recording to start during stop
and recording pause.
– C U F –
P.ON REC
HOLD
Select the recording order of the slot
when the power is turned on.
SLOT SEL
SLOT1
HOLD:
The recording order starts with the
card previously selected when the
power was turned off.
SLOT1:
The recording order starts with the
card that is inserted in Slot 1 when
– C U F –
the power is turned on.
Remarks
minutes or longer separately from
the video recording capacity. The
voice memo area can be used
even when FULL is displayed for
the recording capacity of the P2
card.
space.
stop, recording pause, and
playback.
(continued)
8-2-4 OUTPUT SEL
Items/
Adjustable
Data Saved
Range
VIDEO OUT
VBS
Select the output signal on the VIDEO
SEL
VF
OUT connector.
VBS:Output a regular composite
Y
VF: Output a VF Y signal. The status
Y:
– C U F –
OUTPUT CHAR MENU ONLY
Set the character contents
superimposed onto the output signals
TC
for the VIDEO OUTconnector.
STATUS
MENU ONLY:
Displays only when the menu
characters are superimposed. No
display appears when other
characters are superimposed.
TC: Display the time code. (Displays
<Note>
The TC display position moves up and
down depending on the camera ID
position.
STATUS:
Display the same characters
superimposed on the VF signal.
(Displays the menu when menu
characters are superimposed.)
– C U F –
LCD MON
ON
Select whether or not to superimpose
characters on the LCD monitor. (The
CHAR
OFF
character content is the same as the
video output signal.)
ON: Enable superimpose.
OFF: Disable superimpose.
– C U F –
VF MODE
EE/PB
Select the image to display in the
viewfinder.
EE
EE/PB: Display the playback image in
EE:
– C U F –
THUMBNAIL
ON
Select whether or not to output clip
thumbnails displayed on the LCD
OUT
OFF
monitor to the video output signals.
ON: Enable output.
OFF: Disable output.
– C U F –
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
signal.
display is also superimposed.
Output a component Y signal.
the menu when menu characters
are superimposed.)
(Not interlocked with the VIDEO
OUT CHARACTER switch.)
(Not interlocked with the VIDEO
OUT CHARACTER switch.)
the playback mode.
Always display the camera
image.
99
8
Advertisement
Table of Contents
